Quantity of vinyl for the car cover: guide and suggestions

When it comes to giving a new aspect to yours vehicle. THE car cover It is the ideal solution. However, the optimal quantity of Vinyl movies To be installed to obtain the desired dressing.

This article closely examines the parameters that influence the price of the coverage and the amount of roller Automatic cover necessary for his question. You will also discover some useful tips to help you optimize the calculation The quantity for coverage .

Quantity of vinyl for a car cover: guide and suggestions

Determine the amount of Film de Covering It depends up close on the type of coating in question.

The lid lid

The complete envelope provides the body completely enveloping, the bumpers in bumpers, thus offering a protection maximum vehicle.

The complete cover requires a greater amount of vinyl, which also depends on the size of the vehicle. In particular, the little one car They require about 50-55 feet or from 15 to 16.8 meters of material.

For large vehicles, such as a luxury SUV or a high sedan, generally they would like between 25 and 30 meters of roofing roller to place complete coverage.

Partial coverage

The partial envelope is used in the coverage of some specific areas of the vehicle, such as the hood, doors or roof, in order to apply decorative or advertising reasons.

Be less extensive, partial coverage requires less adhesive movie compared to the complete one. When you make a decision between the two options, it is essential to consider the following elements:

• Aesthetic and protection objectives. If your project includes special reasons, it is necessary to pay particular attention to alignments and fittings for reasons. This may require more materials to ensure that the reasons are correctly aligned on the car.
• The size of the area to be covered. Calculate the total area of each area to be covered using precise measurements. Add the surfaces of all areas to obtain the total size to be covered.
• The budget available.

The type of coverage support

The different types of vinyl films have distinct properties in terms of lengthening, conformity and thickness. If you use a more or less elastic roller, you may need more materials to personalize the style of your car.

Some recommendations for calculating the length of the adhesive vinyl

The calculation the length of the coverage support you need, it is recommended to:

• Measure the length of your car and multiply it by 3 (sides and roof). Take precise measurements of each part of the surface which is expected to cover, using the appropriate measurement tool and taking into account the curves, corners and details.
• Add a safety margin to the calculations from 1.5 to 4.5 meters to compensate for measuring errors, losses of material during cutting and the adjustments necessary during application.
• Call a professional, who is better elected to carefully calculate the amount of material requested based on your objectives and ownership of the vehicle.

For information, the vinyl is generally sold with a width of 1.52 meters. However, the quantities of this material vary considerably, ranging from 15.2 meters to 30 meters, depending on the size of the cars.

Some useful calculations

For example, here are some estimates of Roller size necessary to cover a file BMW :

• Large: you will need about 25-30 meters of adhesive roll.
• A medium-sized size, it takes about 20-25 meters of coverage support.
• Small size, you will need almost 15-20 meters of coverage film.

These estimates concern complete coverings. On the other hand, partial coatings are cheaper in terms of quantity of vinyl.

How to calculate the amount of vinyl to be used for coverage?

Here is the formula you can adopt to estimate the amount of material required to cover the vehicle:

Self length x 3 (for left and right faces and the entire high surface of the vehicle) + safety margin (which varies according to the car properties and the specifications of the winding project).

Take the example of A Renault Clio 4 measurement 4.07 m (4007 cm) Day a:

(4007 x 3) + 25 = 12021+ 25 = 12046 mm.

As a result, the nearest roller size is 1.52 mx 13 m.

Cites another example for a model car Shrewd. If we consider that it needs a quantity of vinylEnviron 9mSo the size of the nearest movie will be 1.52 mx 10 m.

Conclusion

The amount of coverage movies plays a central role in the final appearance of the vehicle. This factor not only affects costs, but also the sustainability and resistance of the body.

Therefore, whatever the choice of the coating you plan to set: complete or partial, it is recommended to consult the coverage professionals in order to obtain personalized advice on the amount of stickers to use. Therefore, you can install a robust and aesthetic envelope on your body.