Platelets and brake discs Download: maintenance

THE brake discs And the brake pads are two organs destined to rub on the vehicle. After changing its two organs, they must be made gradually working carefully to optimize their effectiveness.

This phase of development that Improves brake performance is called drain. Allows elements to adjust and model their contact surface. THE drain It also helps to preserve the life of the life of the brakes.

The preparation of the brakes

THE drain must be performed with each installation New brake and disc platelets.

To do this, you have to choose road sections that allow you to safely perform the operation. Usually you have to drive on a long enough journey to perfect the drain. You have to prepare to make small brains at different speeds during this period. Which involves you have to find a less frequented road and where you can freely choose a speed without disturbing and without endangering others.

During the drainAvoid loading the vehicle heavily. It also avoids running the brakes at the beginning. This can freeze the brakes. That is to say that the bearings and brake records react like two ice cubes rubbed on each other. This means that braking is ineffective and dangerous.

How does the brake that manages a vehicle takes place?

Perform a series of platelets and discs It requires about 200 braking. Since the mechanic that replaces the disc cannot perform these braking seminars, is being a motorist. If you follow the following instructions, it is not necessary to press the pedal 200 times to obtain an operational brake.

• Make 20 complete, calm and brusque braking at a maximum speed of 50 km/h.
  You can replace it with 20 partial brains passing from 80 km/ha
  30 km/he by pressing slightly and moderately on the pedal.
• It is therefore possible to chain different braking at medium speed.
• Always wait 30 seconds after each braking to allow the friction elements of
  Cold.
• Absolutely avoid brutal stops, continuous braking and high -speed braking
  Until the end of the race. It is counterproductive.
• You don’t have to travel the necessary 500 km simultaneously. Just repeat and respect the instructions for a few days.

What is the brake of a vehicle in execution?

THE drain Improves the Generation of friction of brakes and discs. This allows to obtain a better braking in the sense that platelet accessories correspond better to the surface of the discs. During the process, the braking organs are subject to favorable thermal conditions. This allows to obtain an effective and stable braking on a wider temperature range.

THE drain It is also a time to test brakes. It is necessary to check if there is no noise or vibration during the driving phase and braking. We must also check the pedal behavior. In case of noise, vibrations, softness of the pedal, it is necessary to immediately bring the car to the garage.

How to know that brake pads are efficient?

You can face the braking conditions in the city or on the highway when the brakes no longer have anomalies.

• The braking distance is exactly as it should be. It depends on the driving conditions, but the values ​​are mentioned in the motorway code.
• THE brake pads Have a change of color, distinct from its original color before installation. The change obtained is the result of creating the transfer level.

Special mention for covered brake discs

There are pilots that opt ​​for the covered brake discs. These models are very aesthetic for sports cars. At the same time, the coating allows you to protect the disc from corrosion.

However, pay attention to poor quality records. Their coverage can alter braking comfort. So you have to choose your records. However, if you hear abnormal noises or slightly smoke during the first braking, do not fear anything. It is only the removal of a layer in front.

Conclusion

In conclusion, the brake discs and brake pads are vital components of a vehicle’s braking system, designed to work together to ensure safe and efficient stopping power. After replacing these critical parts, it is essential to allow them to undergo a break-in or bedding-in process. This gradual working phase allows the brake pads and discs to adjust to each other and optimize their contact surface, improving their effectiveness over time.

The break-in process is crucial because it helps ensure that the brake pads are properly seated on the discs, which increases friction and improves overall braking performance. During this phase, the material on the brake pads gradually transfers to the brake discs, creating an ideal contact surface for maximum performance. This process also helps prevent issues such as glazing or uneven wear that could compromise braking efficiency.

Additionally, properly bedding-in the brake pads and discs contributes to the longevity of the braking system. By ensuring that the parts wear evenly and efficiently, you can extend the life of your brakes and reduce the need for early replacements.

In summary, the break-in period for new brake discs and pads is an essential step in maximizing their performance and durability. By following the proper procedure, you ensure better braking efficiency, smoother operation, and a longer lifespan for your braking system, ultimately enhancing both safety and vehicle reliability.