Discover the advantages of the car cover

Putting coverage on a car allows you to do it Change your appearance and protect the paint. Be for a unique style or to preserve the body, asks for the application of an adhesive film Patience and good preparation. This guide explains you step by step How to put a coverage like a professional, even if you are a beginner.

What is the coating of the car and to get it?

Cover is a adhesive movie Specially designed to cover the body with a car. It can be used to change the color of the vehicle, Add a special effect (mat, shiny, carbon, etc.) Or simply protect the original paint.

This film is generally composed of PVC Sougulewhich allows him to be applied to all forms of the vehicle, including curved parts such as mirrors or bumpers. It is also reversibleWhich means that you can remove it later without damaging the original paint.

To ensure Professional result and lasting dressIt is essential to choose a quality film. ON www.covering.frYou will find the The best market coverage filmsTested and approved by professionals. Whether you are an amateur or an expert, you will find a wide choice of colors and finishes, as well as suggestions for a successful installation.

What are the necessary tools and materials?

Before starting, it is essential to have the right tools. A successful installation depends both of the technique and the equipment used. Here’s what you will need:

1. AND Film The Covering Good quality
2. A flexible raid To apply the film without bubbles
3. AND Thermal displacement Soften the vinyl on the curved parts
4. AND Precise cutter To cut the edges
5. AND Cleaning spray and a microfiber cloth to prepare the surface
6. A magnetic rubber To keep the film taking place before setting up

With these tools, the application will be simpler and the most professional rendering.

A clean surface is essential So that the film adheres correctly. The minimum dust or trace of fat can create bubbles under the coverage and damage its appearance.

Start with Wash the car with an degreasing shampoo To remove all the dirt. Then switch to Chiffon microfiber Immersed in an isopropyl alcohol product to remove wax or Polish residues.

Elements like doors handles, logos or antennas It should be removed if possible. This will apply the film more easily and get a clean finish.

The essential passages to put a car cover

The application of the coverage is performed in several steps:

1. Place the movie Aside to be covered without removing the sticker. Remove well to be sure that it covers the entire surface.
2. Remove the protective film And attack the vinyl starting from the center.
3. Use razzlette To die and chase the air bubbles while gradually smooth outwards.
4. Heat slightly with thermal displacement On the bent areas to soften the film and allow him to marry the shape of the vehicle.
5. Cut out The edges with a cutter for a clear and precise rendering.

You have to take your time to avoid folds and air bubbles. If a bubble appears, it is possible Perforate it with a refined needle And gently smooth the area with raclette.

The parts like mirrors, bumpers or wings Ask for more attention. The film tends to offend on these areas, so you have to use The warmth of the thermal shift To relax it.

It is advisable Shoot the film slightly To avoid folds, but without forcing too much to not distort. On the ago, it is better make specific cuts Rather than trying to excessively stretch the coverage.

Errors to avoid during the installation of the lid

Even with a good preparation, some errors can ruin the result:

• Apply the film without cleaning the surface He leads bubbles and poor collage.
• Becomes too strong in the film It can distort and create irregularities.
• Do not heat the curved parts Risk of causing visible folds.
• Take the movie too short forces to start the installation again.

Taking time to die and heat the coverage when necessary, these errors can be easily avoided.

A well maintained coverage can last Between 5 and 7 years. To maintain its brightness, it must be washed with suitable products.

Avoid Automatic washing rollsBecause they risk damaging the film. It is better to use Manual washing with a microfiber glove and a soft shampoo.

To protect the coverage even more, some use Special treatment in vinyl ceramic. It adds a protective layer and facilitates maintenance by preventing the dirt from grasping too much.

Should you put your coverage or call a professional?

The installation of coverage requires Patience and a certain know-how. Some prefer to do it alone to save money, while others use a coverage professional to ensure a perfect result.

Here is a comparison between the two options:

If you want to put a complete cover and a beginner, it can be Interesting to start with a small part of the vehicle To train before attacking everything.

This guide gives you All the keys to put a car covers like a professional. With the right tools and a good technique, it is possible to obtain an aesthetic and durable result.