Ceramic treatment for coverage and PPF

THE Ceramic treatment for coverage or PPF It is a revolutionary technology in the field of maintenance and protection of car bodywork.

This coating becomes a popular choice between cars lovers and owners interested in the conservation of the aesthetics of their PPF or the coverage of films, the simplification of their general maintenance and the optimization of their life of life.

In this article, we will discuss the different aspects relating to the application of ceramic treatment and the advantages it offers.

What is a ceramic treatment?

Ceramic treatment is an advanced technique to protect and improve surfaces, mainly used in details car.

It is a ceramic coating that offers greater resistance to groovesBad weather and environmental contaminants such as insects or bird excrements.

The sustainability and quality of this layer also allow to improve the shine and splendor of the paint.

The advantages of ceramic treatment for coverage and PPF

Ceramic treatments offer several essential advantages for the conservation and aesthetics of PPF movies and vinyl, because they allow:

• Guarantee greater protection against environmental elements. These coatings create a waterproof barrier to contaminants such as dirt, dust and products aggressive chemicals. In addition, they resist UV rays, thus avoiding the discoloring and premature deterioration of the surfaces exposed to the sun.
• Develop the hydrophobic power of the automotive support, allowing you to facilitate cleaning.
• Brings an intense shine protective movie And cover, improve the color depth and provide a new and glossary appearance.
• Reduce the formation of micro-graffi and improve the resistance of light scratches car films. In fact, ceramic treatments are distinguished by a high hardness that resists these attacks, thus offering greater protection against surface damage that can occur when washing the car or exposure to difficult road conditions.
• Guarantee long -term sustainability (with an appropriate interview), which makes it an profitable investment.
• Facilitate vehicle maintenance, reduce dirt adhesion and minimize the need for frequent polishing.

How much does a ppf and ceramic treatment cost?

The cost of a PPF ceramic treatment varies considerably depending on several factors, such as the size of the vehicle, the type of protective movie used, the complexity of the installation, etc.

In general, the prices start from € 500 and gradually equate to the areas to be covered. In particular, they can reach:

• € 1,500 for front bumpers, mirrors, headlight optics, hood and front wings.
• € 3500 for the doors, the roof, the trunk, the rear bumpers and the rear wings. This price can also be applied to previous elements.

Likewise, the cost of a ceramic coating for automotive coverage can oscillate according to the same factors mentioned above.

In general, the cost of the installation of a layer of ceramic by a professional is between € 450 and € 700. On the other hand, if you plan to apply it for yourself, this operation can cost you about € 30 for each product used. The total cost of the project can amounted to € 600 and € 700.

The steps to follow to apply a ceramic treatment on coverage

The application of the ceramic treatment on a coverage provides greater protection against external whims. As we have seen previously, this layer is ideal for preserving the new appearance of the envelope, facilitating its cleaning and maintaining the aesthetic of the car.

With this in mind, we advise you to use Q² PPF EVO: the product of Ceramic protection Both requested for the following reasons:

• It is very practical and easily adapts to all vinyl and ppf supports.
• It aims to strengthen the hydrophobic properties of PPF and vinyl supports and optimize their self -cleaning power.
• It strengthens the sustainability and chemical resistance of the protective films and coatings thanks to its composition in Polisilazane modified fluorine.

Here are the steps to follow to correctly apply Q² PPF EVO:

• Choose a dry, fresh and ventilated workplace, sheltered from the sun and atmospheric whims. This space must also be on, because the installation of this layer implies the use of a light of the day of light.
• Carefully prepare the coverage support by eliminating contaminants and residues capable of preventing the right link of Q² PPF EVO. You can use the Gyeon Shampoo – Q²M PPF was and the pre -established product Q² M foam to perform a deep cleaning of the vehicle.
• Soluvare the support, in particular with the renewal of Q²M PPF, to eliminate micro-scratchs and other superficial defects. In this way, you get a perfect finish.
• Degrease the paint. At this stage, it is essential to use the Gyeon Q2M preparation degreaser.
• Completely remove all the old coatings and protective layers.
• Verify that the adhesive film is perfectly dry before applying protective wax.
• Shake the Q² PPF container before use.
• Place a Swedish microfiber on the applicator.
• Slightly apply ceramic protection to microfiber.
• Apply uniformly ceramic protection, performing circular or back movements. Make sure to cover the entire surface of the vinyl while working the area by area.
• Use a specific microfiber for large cleaning. You can also get help from Gyeon Q²M Prism Plus. This tool is very effective in the best spot points thanks to its goal. So you can get rid more easily.
• Use another clean microfiber for finish finish. Make sure to clean gently to avoid removing the product already applied. You can also use the Suede. Q² For an impeccable finish.
• Let the ceramic coating be completely dry (for 12 hours), to ensure optimal adhesion and a complete increase.

Some useful tips for successful installation

To make a careful installation of the protective level, it is advisable:

• Use two microfibre at least for layer and return them if necessary, during application, to use the cleanest facets possible during cleaning.
• Use the Q²M maintenance, in a wet application context, to ensure the correct adhesion of ceramic wax.
• Relieves minor surface defects, such as holograms, using the Q² ppf renew To guarantee a homogeneous wax application.
• Avoid exposing the vehicle to aggressive substances for the first 14 days after the installation of the wax.

Recommended accessories for practical application

Here is the list of accessories that can be used to optimize the implementation of ceramic protection:

• The Gyeon Glove – Q²M Washpad is the spoiled accessory to completely remove the dirt, thanks to its double fiber composition in long crying to effectively eliminate contaminants and another short hair fiber to remove any residues.
• The Gyeon microfiber towel – Q²M Silkdryer Evo 70 x 90 cm contributes to the optimization of the application process, thanks to its dense composition in innovative synthetic fibers. This optimized design guarantees a strong absorbent power that allows faster indexus.
• Microfiber – Gyeon – Q²m Polish Wipe Evo is used to effectively eliminate the shiny and possible harmful particles. Thanks to its unprecedented double -sided design: one side with short fibers and another with long fibers to completely remove polishing oils and guarantee a more efficient installation of the protection layer.

Conclusion

Ceramic treatment represents a solution of choice for the protection and development of auto films. This solution offers lasting advantages both in terms of aesthetics and maintenance. The sustainability of a ceramic treatment and higher than a wax.

This process provides solid protection against the harmful effects of shocks and contaminants. This allows you to extend the sustainability of the PPF and vinyl film and to simplify their maintenance. In this way, you can guarantee the beauty and brilliance of your car.