5 steps for successful car coverage

THE coverage The car is a popular tendency in the car universe, allowing you to customize the appearance of cars in a singular way. This process consists in the application of A Vinyl movies On the vehicle, according to a structured course.

In this article, we explore the 5 essential passages to put a car cover, leafing through some useful suggestions to obtain a professional and sustainable result.

5 steps to install a car upholstery

The preparation of the seminar

The first step is to prepare your seminar for this operation, taking into account these elements:

• A 20 ° ambient temperature.
• A perfectly clean space and dirt and crooked powder that can compromise the right Film application.
• The elimination of the air current, which can confuse the coverage of the coverage and ruin the quality of the final rendering.

The precomation of the vehicle

Now let’s move on to the preparation of the vehicle. Here are the tasks to be carried out in this context:

• Degrease the surface, using the appropriate product as Isopropil (V0187) or Gyeon Q²m prep to purify impurities.
• Clean the car perfectly, especially with unsaponed water, which is largely sufficient.
• Dry the car completely using compressed air or a soft cloth.
• Create a final cleaning concerning certain specific components, such as tires, rims and balancing panels that can combine dirt. These elements must be covered with paper before installation.

Preparation of installation tools

The installation of coverage implies the use of various tools, such as:

• Cleaning products such as: Remover, PrettyAner, Finalceleaner.
• Sweet rags.
• Different types of raclette, such as flexible, rigid and magnetic raids or with a felt band to avoid damaging the roof tape.
• A glove of application.
• Magnets to correct coverage support before installation.
• A cut of cutting (line ribbon) to ensure a clean cutting of the cover support and better body protection against the stripes. This is the example of the Timodeca that attacks the film along the cut to obtain a more precise result. There is also Fildec who must be glued before the adhesive film implementation
• Essue Carch to absorb the rest of the liquid after cleaning.
• A cutting tool, like the adjustable cutter. It is recommended to use a cutter with a 45 ° blade for straight cuts and another with a 30 ° blade for the best cuts.
• A hot air gun to heat the adhesive film.
• A thermometer to measure the cover tape temperature.
• Markers to mark the position of the vinyl.

To the POS coverage movie

Now we approach the most important part, to that of the creation of the new coating. This phase covers the following tasks:

• Specify the type of adhesive support necessary for the car covering. In particular, the flow film is suitable for applications that require a deformation, in particular, for the collection of the mirror. On the other hand, the wandered support is generally used on flat surfaces without complex shapes.
• Perform reduced and final cleaning before installation of the coverage support, for example, with the Gyeon Q²m prep
• And a microfiber towel. Do not use the detergent directly on the body, but rather on the cloth.
• Effectively clean the edges of the body using raids wrapped in inhumidated cloths with the cleaning product.
• Mark the edges that must not be applied the lid, with the cutting wire.
• Cover the destination surface with the coverage support. Ideally, you can keep it using magnets, to make a more exact measurement.
• Cut and remove the excess material, keeping a margin, to ensure a more elegant blanket of the edges. To do this, cut the ribbon strictly, carefully following the contours of the canvas.
• Remove the coating and paste the coverage support.
• Flash the adhesive film using the thermal gun in order to be able to stretch and adhere easily to the planned surface. Repeat this action whenever necessary, in particular to cover the convex and rounded areas.
• Use raids to strengthen adhesive belonging and eliminate air bubbles.
• Wear the glove to manually delimit the edges and evacuate the air bubbles.

The movie cut

The cut represents another delicate passage in the installation process. Here are the main instructions to consider at this stage:

• Take a cut while passing, at the same time, the razzlette and the cutter to get a millimeter on the coverage support and bring it inside.

• It passes two raids jointly: one on the vinyl and the other under the cutting thread to be able to lift it more easily.
• Use the cutter at 30 ° to correctly cut the plastic tape on the body’s points. To do this, cut the film keeping the cutter inclined outside. This will make you win a small margin to get around the edges to cover.
• Heat the plastic tape slightly on the tips and stop its registration using raclette.

Some suggestions for a professional installation

Here are some useful tips to obtain impeccable installation:

• To ensure precise coverage of the suggestions, it is necessary to remove the Movie of almost two centimeters and warmed them slightly, at 40 °. Subsequently, you have to carefully stretch them to wrap the tips.
• Use the wire Wrapcut Trace the edges of the body. Put it adhesive movie above. So you can cut it without scratching the surface. At the end of the cut, don’t forget to remove the Wrapcut.
• Use the Wrapcut to cut the adhesive movie without using a cutter. To do this, place this wire, then apply the plastic tape on it using raclette. Subsequently, remove excess from plasticized support and wrapcut. You will produce the desired coating with the shape designed by the cutting wire.
• Heats the adhesive film using the thermal shutter to cover curved shapes. Adopt regular movements for this purpose.
• Remove the folds, removing the plasticized support and heating it to adhere more to the desired area. Do not forget to strengthen the installation using raclette after each repositioning.
• Use a 40 ° temperature to deform plastic support and a 90 ° temperature to remove the effect of memory from flow movies. For this last point, it is necessary to heat the melted ribbons while sweeping the thermal deflements according to regular movements. Measure the temperature of this support, which must reach at least 90 °.
• Check the good support of the coverage with sensitive areas, such as empty parts, the lower part of the bumper, the concave areas, etc.
• For optimal hood coverage, it is recommended to lift the film and keep it as many times as you want, until you get the desired coverage. Apply the adhesive coating using a raclette with felt (starting from the center of the hood) and for regular movements from top to bottom.
• It directs the sizes of the cutter against the external wall of the part to be put on the hood, when cutting the excess material.
• To ensure the professional coverage of the slices of the hood, it is advisable:

• Open the hood.
• Carefully warm the plastic ribbon with the thermal movement, at least 90 °.
• By binding the vinyl to cover the rounding of the hood cover.
• F, they firmly adhere to the return of the film beyond the ridge, exerting strong pressure. This in order to avoid damage to the coverage due to a possible water infiltration.
• Finalizes the implementation of the coverage support around the hood using a mini-raplette.
• Hunting any air bubbles by heating them lightly with the thermal gun.

Conclusion

In conclusion, the installation of the vehicle cover transforms a virgin or damaged canvas into an aesthetic work while preserving the original body. Meticulously following all the installation phases, ranging from the preparation of the work area and the vehicle for cutting and finishing, cars of the cars can take their vehicles brilliantly.

Obviously, it is essential to equip you with all the necessary equipment to facilitate and optimize the application. These tools also play an important role in saving time and guaranteeing more comfort during work.